|
|
The Model A6 Spiking/Cutting Cable Cutter was designed to spike/cut
damaged underground cable up to 2 3/4 inch diameter. The A6 cable
cutter is designed as a remote spiking/cutting tool that is installed
on damaged underground cable using a hot stick. The hot stick provides
one step of safety to the linemen. Using the lanyard to remotely
actuate the cutter outside the flash zone provides the additional
safety in spiking a damaged cable.
|
|
|
The Model A6 has a
new Firing mechanism that is operated remotely using a lanyard.
The firing mechanism has its own safety lock pin that is used
during cartridge installation. The Model A6 is easy to operate.
Install the cartridge and firing mechanism, attach the lanyard
and the unit is now loaded and ready. Attach the hot stick,
remove the safety pin, place the spiking/cutting tool over the
damaged cable, clear the area and remotely pull the lanyard.
This will actuate the cutter and the cable is spiked and cut.
|
|
For information on the Hot Stick for Models A1, A4 and A5
Cartridge Actuated Cable Cutters click on Accessories.
Contact CACT-Co for solutions to your cable cutting needs.
|
|
|
